My ceramic hob turns on but does not heat up, what should

* Dołączył: 09 Mar 2024 Posty: 1

The ceramic hob is one of the most resistant and long-lasting appliances in the kitchen. but also one of the most complicated to fix when breakdowns appear . The reason is that the causes of the problems are not easy to determine with the naked eye. But don't worry: today we will help you understand your board a little better. Let's analyze what happens and what you can do if your ceramic hob turns on but does not heat up .

When the indicators of one or more burners on your hob turn red, but do not emit heat, it is necessary to check the operation of four elements to check which of them can be blamed for the failure. So I'm going to tell you what these four systems are, what checks my colleagues carry out and how they fix your ceramic hob.

But be careful! For this time, we recommend that you do Honduras Mobile Number List not try to do it yourself unless you are a true expert. To repair a ceramic hob, a lot of knowledge of electricity and electronics is required; and, furthermore, when finished it is necessary to restore the sealing of the lid with heat-resistant silicone, which requires some skill. It is best that you put yourself in the hands of HomeServe specialists. Hire one of the appliance repair packages , and we will come to your rescue whenever your ceramic hob needs us! Or if you prefer a specific repair, you can call us at 911 774 593.

1. Failure in fire
When only one of the hob burners lights up but does not heat up, it is most likely due to a localized failure in the burner itself. To be sure, we will have to open the plate by removing the back part and extract the affected fire. Next, the technician will check the state of the resistance and the thermostat with a tester .

If the resistor receives current, but it is obvious that the fire is not working, it is probably short and should be replaced.
The problem may also be in the thermostat . Sometimes some of their platinum pieces become black from use and stop making contact. Then, it is enough to remove this layer of soot with a small piece of sandpaper so that the fire heats up correctly again.

2. Failure in the electronic board
When checking the status of the fires with the tester, it is possible that we see that the current does not reach them. In that case, the fault that causes the ceramic hob to turn on but not heat is located on the control board . It may have its origin in:

The relays , which have burned out or are loose.
The burner connections , which are broken or damaged.
In other components of the electronic board.

Wysłany: Sob Mar 09, 2024 09:53